Versa Controls Measurement EcoGage 4V1002

Feature

Description

Number of Channels

2-LVDT or 1-PIEZO

Number of results

2 (Max)

Number of Setups

10 (Max)

Number of Layouts

2 (Max)

inbuilt data storage

16 GB

Hardware Keys

6 Navigation Keys

Result Views

Dial, DRO, Run-Chart

Measurement Modes

Current, Minimum, Maximum, Average, Difference

Dimension Types

Linear

Linear units

MM, Micron, INCH

Linear Resolution

0.1, 0.2, 0.5, 1, 2, 5, 10 Micron

Users

Quality Admin and Operator Login can be created. Max. 10 users limit. (Minimum access to Operator Login)

Digital Outputs

3 Digital Outputs Available (OK, Reject, Rework). Open Collector Outputs

Digital Inputs

NA

Foot-Switch

1 Foot-Switch Connection Available

Communication Ports

1xRS232 (COM1), 1xEthernet, 1xUSB

Formula Editor

Result formula can be edited for combinations of Channels and or other results

Preset And Mastering

Step, Simultaneous (Group)

Tolerance Entry

Nominal, Lower Set Limit (LSL), Lower Control Limit (LCL), Upper Control Limit (UCL), Upper Set Limit (USL)

SPC

Cp, Cpk, (Can be seen on Display of ongoing Measurements as per Subgroup size 10 by default)

Run-Chart

Run-Chart of ongoing Measurement cab be seen on Screen

Job Counters

Total Jobs, OK Jobs, NG Jobs. Separate screen for result wise job counters display

Measurement Delays

Start-up Delay (0.1 to 9.9 Sec Stabilizing Time),

Dynamic Timer Delay (0.1 to 999.9 Sec Time for Actual Measurement after which Data will be Saved)

Measurement Cycle

Auto Cycle (Auto Time Base) and Measurement Cycle (Trigger Based)

Additional Displays

4 additional displays for both results (Configurable to MAX, MIN, AVG, DIFF, Cp, Cpk)

Shortcuts on Main Screen

Shortcuts for Setup, Clock Settings and Results. Need to long press for 2 seconds (only for Quality Login)

Serial Output String

Standard

CSV Files

For every measurement unit will send csv file to server (SmartServer Utility) and also update day-wise csv file of every Setup.

CSV files sharing to USB Drive

Generated csv files can be copied to USB Drive (Pen Drive) manually

Setup Files Restore/Backup

All Setup Files in Unit Can be Shared to USB Drive (Pen Drive) as backup, or Setups from other Similar Unit can be Loaded/Restored to this Unit

Auto data transfer

After Completion of Measurement (Each Time) Measured Data will be Transferred to Serial Port without any External Trigger

Auto Air Cut-Off

Optional on Extra Charge (Contact Supplier) (Air will be in full consumption while measurement while out of Measurement consumption will be cut by approx. 80 to 90%)

Low Pressure Indication

Optional on Extra Charge (Contact Supplier/Manufacturer)

Wi-Fi, Bluetooth

Optional on Extra Charge (Contact Supplier/Manufacturer)

GSM for SMS facility

Optional on Extra Charge (Contact Supplier/Manufacturer)

Fanuc Communication

Optional on Extra Charge (Contact Supplier/Manufacturer) for Auto-Offset Function through Serial Communication (RS232)

RS-485

Optional on Extra Charge (Contact Supplier/Manufacturer) for Auto-Offset Function through BCD Communication (Digital IO's)